|Home||» Products||» Air Pollution Monitoring Instruments||» Combo PM10 & PM2.5 Sampler|
Combo PM10 & PM2.5 Sampler
- Unit of Measure
- Payment Terms
- Supply Ability
- Ready Stock/Customize
- Delivery Time
- Packaging Details
- Corrugated Box Packing.
- Main Export Market(s)
- Main Domestic Market
- All India
- ISO Certified Co.
Combo PM10 & PM2.5 Sampler
New air quality standard notified by Govt. of India where measurement of PM10 and PM2.5 dust is required simultaneously with other pollutants to decide status of air pollution. So far samplers developed in India do not have provision for simultaneous sampling of PM10 and PM2.5 dust. Thus two samplers need to be operated simultaneously to know concentration of these pollutants in ambient air. Thus measurement of these parameters become expensive and difficult as significant efforts are required in transportation and operation of two sampler at one place.
Ecotech realizes these limitations and took lead to develop impactors based Combo Sampler for simultaneous sampling of PM10 & PM2.5 dust using single instrument.
Single stage impactor matching to European Union designs has been fitted in the Combo Sampler for PM10 measurement. This impactor removes dust greater than 10 microns from ambient air when sucked through it at constant flow rate of 2.3 m3/hr .
For sampling of 2.5 micron dust two stage impactors based on the USEPA standard designs have been incorporated in AAS 271.This impactor removes dust greater than 2.5 microns from ambient air in two stages( first in Pm10 impactor and second in WINS impactor fitted in series ) Air is sucked through it at constant flow rate of 1.0 m3/hr
Ecotech AAS 271 is fitted with one of the best brushless and noiseless pumps of adequate capacities to generate needed sampling rates for PM10& PM2.5 streams. Constant flow rates in both air stream are maintained through out sampling duration with the help of critical orifices. Pump assembly is equipped with heavy duty induction motor which ensures that sampling rate are not affected due to input voltage fluctuations.
AAS 271 is equipped with two flow meter which continuously display sampling flow rates of two streams controlled by orifice.
Modular design of sampler, tubing and other fitments made this sampler simple easy to transport & operate can be used successfully in harsh Indian climatic conditions
Flow Rate PM10 : 38 lpm (Constant Flow Maintained with the help of critical orifice
PM2.5 :16.7m3/hr (Constant Flow Maintained with the help of critical orifice)
Particle Size :Particles of 10 microns and below collected on standard glass micro fiber filter paper of 47mm diameter fitted below single stage impactor. While particles of 2.5 microns are collected in a separate 46.2 mm diameter PTFE membrane filter fitted at the bottom of WINS impactor of two stage impactor.
PM10 impactor : Single stage matching to European Design (according to EN12341)
PM2.5 Impactor : Two stage as per USEPA Published Designs(Federal Register 40 CFR part 50)
Flow Record :Independent Flow Indicator for PM10 & PM2.5 streams to display air sampling flow rates passing through filters accurately.
Cabinet :Two part modular, corrosion free, lockable & easy to transport.
Operation :Up-to 28 hours continuously
- Contact Details
- ECOTECH INSTRUMENTS
ECOTECH INSTRUMENTS All Rights Reserved.